Shopping KMC wheels for your Ram 1500? Good taste. Every wheel on this page is drilled 6x139.7 (6x5.5) — the pattern on the 5th-gen Ram 1500, 2019 and newer — so it bolts right up. But read the next part before you buy, because Ram changed things up.
The 2019 redesign switched the Ram 1500 from the old 5-lug pattern to 6x139.7. If your truck is a 2011–2018, you need 5x139.7 instead — we'd rather tell you now than after the box shows up. When in doubt, count your lugs: six means you're home.
For 5th-gen trucks, the Fuel D576 Assault is our best seller — it just suits the Ram's body lines. The KMC KM544 Mesa is right behind it if you want something more aggressive. Running factory air suspension? Stay around +18 to 0mm offset so nothing rubs when the truck kneels to entry mode. Coil-spring trucks get more room — 0 to -12mm leveled, -18mm for a wider stance.
Free shipping over $1,000. Unsure about your year? Call 405-627-1620 and we'll verify fitment before you spend a dime.
Fitment
-
Bolt pattern: 6x139.7 (6x5.5)
-
Fits: 2019–present Ram 1500 (5th gen)
-
Hub bore: 77.8mm
-
Offset guidance: +18 to 0mm for factory air suspension; 0 to -12mm for leveled coil trucks; -18mm for a wider stance
- ⚠️ 2011–2018 Ram 1500s use the older 5x139.7 pattern — different wheels entirely. Count your lugs if you're unsure.
Shop by brand
FAQ
What is the bolt pattern on a Ram 1500?
6x139.7 (6x5.5) on the 5th-gen trucks — 2019 and newer. The 2011–2018 Rams ran a 5-lug 5x139.7 pattern, so know your year before ordering.
I have a 2016 Ram 1500 — will these wheels fit?
No. Your truck takes the older 5x139.7 pattern, and nothing on this page will bolt on. Give us a call and we'll point you at wheels drilled for your generation.
What offset works with the factory air suspension?
Stay conservative: +18 to 0mm. The truck drops into entry/exit mode and the clearances get tight, so this isn't the place to push the stance.
Will 35s fit my 2019+ Ram 1500?
With a leveling kit or small lift, yes — pair them with a 0 to -12mm offset and plan on minor trimming of the inner fender liner. On air-suspension trucks, keep the offset closer to stock.
Can I reuse my factory TPMS sensors?
Yep. Your factory tire pressure sensors swap straight into any of these aftermarket wheels — no new sensors needed, and no dash lights when it's done right.
Free shipping on orders over $1,000. Questions about your Ram's year or suspension? Call 405-627-1620 and we'll get it dialed in.
