ReadyLIFT 2017-2021 Ford Super Duty Diesel 4WD 2.5" Coil Spring Front Lift Kit W/Falcon Shocks

ReadyLIFT Suspension is now offering our first 4" Coil Spring Lift Kit fitting 2017-2022 Ford Super Duty F250/F350 4WD Power Stroke® trucks with new Tubular Radius Arms. The 49-27421 includes front and rear Falcon 1.1 Monotube series performance shocks with our venerable front track bar relocation bracket, tubular radius arms, and rear fabricated blocks. This delivers an excellent alternative for lifting a F250/F350 Super Duty trucks to fit larger tires.

What's included:

• 4" Lift Springs Falcon 1.1 Monotube Front and Rear Shocks Track Bar Relocation Bracket Radius Arm Sway Bar Drops Bump Stop Extensions Carrier Bearing Drop Front Brake Line Brackets Fabricated Rear Lift Blocks Hardware Pack SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner‚¬„s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components. DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions Estimated Installation Time: 4.5 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly) Have a certified mechanic do it for you! Location * Location Distributor Name WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product Falcon Shocks - The Ultimate Blend of Performance, Quality, and Bang for the Buck Falcon 1.1 Monotube Shocks deliver increased stability improved ride quality and comfort for a daily-driven vehicle in an economical, compact performance package. Falcon 1.1 Monotube Shocks have been optimized for on-road driving with increased stability over stock for driven vehicles on and off road.‚ High-Value Performance is the driving force behind these vehicle-specific dampers for trucks and SUVs. Falcon 1.1 Monotube Shocks are ideal for daily driven trucks and SUVs as well as the enthusiast wanting a consistent controlled feel through all driving conditions Falcon 1.1 Monotube shocks include race-inspired performance, handling, and stability for off-road rigs. Falcon Jeep shock absorbers will significantly increase the chassis performance of any lifted truck or SUV. Falcon 1.1 Monotube Shock Specification 2-1/8" shock body for high-value performance 6061-T6 aluminum alloy billet piston 1/2" induction hardened chrome plated shaft resists rock damage corrosion and shaft buckling Microcellular Foam Progressive Bump Stops (Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders.)

Tire fitment: 37x12.50 for no rub on a 9" wide wheel with 0 offset 18" - 37X12.5R18 20" - 37X12.5R20 22" - 325/60R22